Diamonds and Ruffles Scout Tee + instructions

The Fall semester is finally over! That means time to sew and watch TV! To celebrate the end of finals, I made this lovely scout tee Friday. I wore to out on Saturday to see The Hobbit and already know I’ll be wearing it a lot more. Skip to the bottom of the post for instructions.

IMG_1484

Fabric is from Grandma’s stash. It’s definitely cotton, but has a really cool soft/slick texture to it as well. It’s a really crisp white with subtle little diamonds that catch the light.

IMG_1488IMG_1491

What I really love about this shirt is that it’s really loose and comfy, but can be worn casually or dressed up. I need to hand sew some tiny belt loops on the waistline so the skinny belt will stay up without having to wear it too tight.

IMG_1482

This is a really easy modification to do, although making the ruffles even takes foreverrr. I have a love hate relationship with ruffles. Here are the steps I took:

1. Slash the pattern at the “shorten/lengthen” line and then cut out fabric as usual (just leave off the bottom part you cut off).

2. Sew the shoulders, bias neckline, sides, and sleeves as usual. I used 1/4″ double fold bias tape and used a slipstitch to hand sew it to the inside of the garment.

3. Cut out two long rectangles for the ruffle. The length of my two rectangles were about 40″ each (from selvage to selvage for each rectangle.” Make them smaller or larger depending on your shirt size and how full you want the ruffle. The height of the rectangle should be how much length you want to add to the shirt + seam allowance (I did 1/2″ at the top and 3/4″ for the folded hem). Make the rectangles really long, and you have a tunic or dress

4. Sew two lines of basting along the top of each rectangle 1/4″ and 3/4″ away from the edge. You’ll be sewing between these lines in a minute. Or use whatever method of gathering you want. Basting just means use the longest straight stitch on your machine.

5. Sew the rectangles right sides together so you have a tube and press seams open.

6. Gather the rectangles by pulling both thread tails and evenly redistributing the ruffles. This may take a while. Keep doing this until the rectangle is the same length as the edge of the shirt.

7. Match side seams and pin the gathered rectangles to the shirt edge, right sides together.Use as many pins as necessary. Keep fussing with those ruffles and get them evenly distributed! No one likes ripping out stitches later.

8. Using a straight stitch, sew the top and bottom together with 1/2″ seam allowance.

9. Pull out the basting. Finish the seam with a zig zag stitch, serger, or your preferred method. You could also sew a skinny piece of elastic onto the seam at this point if you want the shirt to be fitted at the waist.

10. Roll the bottom edge under twice, press, and hem.

TA-DA!

Advertisements